How does a Storage Water-Heater Works & Its Primary Benefits

The reservoir of a water storage heater Singapore can hold 20-80 gallons of water. The water enters the reservoir through a tube that is fitted to the bottom of the tank and hot water is released through a tube that is fitted to the top of the tank. Electrical power or natural gas is used to heat up the water. The reservoir always remains full. Thus, you never run out of hot water.

Key Features

The water that is stored in the reservoir is heated to a previously set temperature on the thermostat. This type of water heater is fitted with a release valve which works as the precautionary system. It opens when the temperature of the water or the pressure level inside the reservoir exceeds the previously set levels (safe level) to prevent any type of accident.

When the storage water-heaters are used, the loss of standby heat (hot water loses the heat to the environment) may result in excess consumption of electricity or fuel. Some storage water heaters automatically start heating up the water whenever it loses some temperature. This results in continuous consumption of energy. However, the tanks of the latest models of storage water heaters are made of heavily insulated material to prevent the loss of standby heat. Therefore, the storage water heaters have become energy efficient.

Benefits of Installing Storage Water Heaters

• You have access to 20-80 gallons of hot water (depending upon the tank’s size) at any time even. Thus, the possibility of running out of hot water is extremely low.
• The cost of installing and repairing a water storage heater Singapore is less than the tank-less heaters.
• The unrestricted water flow-rate makes the storage water heaters suitable for all types of shower fixtures.
• There is no need to install a storage water-heater closer to different points of use. It can be installed anywhere in the bathroom without affecting the flow of hot-water.